2500 WLC, attach AP?

[Scott Fella]

Yeah what Leo said:)

Thanks,

Scott Fella

Sent from my iPhone

[Umit AYDINLI]

It's a simple. First connect to the console witch wlc. and

(Cisco Controller) >transfer download datatype code

(Cisco Controller) >transfer download mode tftp

(Cisco Controller) >transfer download serverip 10.77.244.196

(Cisco Controller) >transfer download path .

(Cisco Controller) >transfer download filename filename.aes

for the referance page http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

[bechong]

Hi Zheka,

Can you please provide some guidance on how you got the AP to be assigned an IP address via Internal DHCP? I can't seem to get this to work.

Directly connected 2600 AP to 2504 WLC

AP is NOT assigned a static IP address

AireOS code version 8.2.x

Thanks much.

[jryanearl]

So, I don't know if any of y'all saw the 7.4.X release notes, but it now states directly connected APs are supported in Local-mode only now.

[Abhishek Abhishek]

If multiple Ethernet ports on a Cisco 2500 Series Wireless Controller are uplinked to an infrastructure switch, you should make sure data interfaces (management or dynamic interfaces) or AP-managers interfaces are configured for these uplinked physical ports. Physical Ethernet ports which are used as an uplink to an infra switch should not be left un-configured. This may result in unexpected behaviors.