10-18-2012 12:54 PM - edited 07-03-2021 10:52 PM
Why is WPA2 not an option on my devices currently? They are running firmware 2.0.2 (I know 2.0.4 is out - but I thought the 541N was WPA2 capable out of the box when they shipped). I see the normal WEP, WPA-Personal and WPA-Enterprise, but not WPA2. I am sure it is something simple and I am simply missing it - but any pointers would be appreciated.
Solved! Go to Solution.
10-18-2012 02:14 PM
I don't have a 541N on hand to look at but the data sheet does indicate that it supports WPA-2 Personal (PSK) and WPA-2 Enterprise.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10492/data_sheet_c78-566239.html
It looks like you can select the WPA version and cipher suite per the administration guide after you select personal or enterprise.
I would recommend using either WPA-TKIP or WPA2-AES and not to mix the versions.
10-18-2012 02:14 PM
I don't have a 541N on hand to look at but the data sheet does indicate that it supports WPA-2 Personal (PSK) and WPA-2 Enterprise.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10492/data_sheet_c78-566239.html
It looks like you can select the WPA version and cipher suite per the administration guide after you select personal or enterprise.
I would recommend using either WPA-TKIP or WPA2-AES and not to mix the versions.
10-18-2012 02:22 PM
See? Duh, it was an easy one. You are correct!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: