acces point 1131 cisco

[Dhikra Marghli]

Hello

i have a acces point Product/Model Number : AIR-LAP1131G-E-K9  with version Version 12.3(8)JEA

and controller wireless virtuel avec ios 8.9.100

so i want to know what is version image ios  in acces point  1131 to work with this image controller virtual 8.9.100

thanks in advance

//////////////////////////////////////////////////////////////////////////////

show version
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.3(11)JA4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 17-Jul-07 19:04 by hqluong

ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

ap uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w7-mx.123-11.JA4/c1130-k9w7-mx.123-11.JA4"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
--More--  
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1131G-E-K9 (PowerPCElvis) processor (revision D0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1424Q10M
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 54:75:D0:B8:0D:BA
Part Number : 73-11587-02
PCA Assembly Number : 800-30422-01
PCA Revision Number : B0
PCB Serial Number : FOC14224L86
Top Assembly Part Number : 800-29582-02
Top Assembly Serial Number : FCZ1424Q10M
--More--  Top Revision Number : A0
Product/Model Number : AIR-LAP1131G-E-K9

Configuration register is 0xF

ap#sho
ap#show ip inter
ap#show ip interface br
ap#show ip interface brief
Interface IP-Address OK? Method Status Protocol
BVI1 192.168.0.22 YES DHCP up up
Dot11Radio0 unassigned YES NVRAM up up
FastEthernet0 unassigned YES NVRAM up up
ap#sho
ap#show run
ap#show running-config
Building configuration...

Current configuration : 1426 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$BUK9$q5q4xhmrA6Y1ZTAsRaacu0
!
ip subnet-zero
!
!
no aaa new-model
!
dot11 ssid SOTETEL
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 0812435A0C0D001B405B5D5D
--More--  !
dot11 ssid TT-WIFI
authentication open
guest-mode
!
power inline negotiation prestandard source
!
!
username Cisco password 7 14341B180F0B
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid SOTETEL
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
--More--   channel 2422
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
!
ip http server
--More--  no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end

ap#
ap#

/////////////////////////////////////////////////////////////////////

and i send screen shot for acces point 

[marce1000 · Accepted solution]

 - I think this ap-model is no longer compatible with 8.9 google on 'cisco wireless compatibility matrix' to get the compatibility-info's for various ap-models, controllers and software releases.

 M.

[Sandeep Choudhary · Accepted solution]

1131 AP last Supported version is 8.0.X so you should run 8.0.X On wlc to join it.

[Daniel Ordóñez Flores · Accepted solution]

Hi @Dhikra Marghli

It's no possible, the last version that support models 1130 is 8.0.152.0 and you AP needs 153-3.JA12
15.3(3)JAA12 12.4(25e)JAP12. Please check the wireless compatibility Matrix.

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

spero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"

**Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *

[Leo Laohoo · Accepted solution]

The final WLC firmware the 1130 is supported on is 8.0.X.X.

[Dhikra Marghli]

Hello

i can  possiblity convert ios Acces point 1131 :  to other image ios that controller can join this acces point  without  change image ios controller virtual ???

thanks in advance 

Product/Model Number:	AIR-LAP1131G-E-K9
Top Assembly Serial Number:	FCZ1424Q10M
System Software Filename:	c1130-k9w7-tar.123-11.JA4
System Software Version:	12.3(11)JA4
Bootloader Version:	12.3(8)JEA
System Uptime:	11 minutes

[Leo Laohoo]

The AP can be converted to autonomous IOS which means the AP can be configured like an ordinary AP.

[Dhikra Marghli]

I means  Access Point IOS Release for this acces point :     

For       TO         ===========>  other  Access Point IOS Release without change IOS relase controller 8.9.100 ??

it is possible or NOT ???????

Product/Model Number:	AIR-LAP1131G-E-K9
Top Assembly Serial Number:	FCZ1424Q10M
System Software Filename:	c1130-k9w7-tar.123-11.JA4
System Software Version:	12.3(11)JA4
Bootloader Version:	12.3(8)JEA

[Sandeep Choudhary · Accepted solution]

There are only two ways to make it work.

1. Either conver 1131 AP to Autonomus AP

2. Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

thanks 

Sandeep can you send me the  link to download image ios release  from Site Cisco  153-3.JA12   /// 15.3(3)JAA12 /// 12.4(25e)JAP12

May be when i can try for this IOS , the Vcontroller can join this acces point 

thanks in advance

[Sandeep Choudhary · Accepted solution]

Here is the link for 1130AG:

https://software.cisco.com/download/home/279537722/type/280775090/release/12.4.25e-JAP12

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

Hello

Sanddep you say :

There are only two ways to make it work.

1. Either conver 1131 AP to Autonomus AP

2. Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.

SO the final solution is :===>

1)  conver 1131 AP to Autonomus AP :=========> how i can do that ???, with this IOS  Realse https://software.cisco.com/download/home/279537722/type/284180979/release/12.4.25d-JA1   !!!!

2) Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.

i wait to reply me 

thanks in advance

[Sandeep Choudhary · Accepted solution]

yes.

Intstall Autonomous image to make it as standalone AP: https://software.cisco.com/download/home/279537722/type/284180979/release/12.4.25d-JA1

or 

downgrade vWLC to 8.0.152.0 version

[marce1000]

 - Not  , 

 M.