cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

643
Views
0
Helpful
4
Replies
Beginner

Access point not joining the vWLC (AIR-LAP1141N-E-K9)

For my home LAB i`m using a cisco vWLC (version 8.3.143.0). and i`m try to join this access point.

But that is not join.

This is the logging of the access point:

*Apr 6 12:18:35.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.100.250:5246
*Apr 6 12:18:36.008: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to interface is getting down
*Apr 6 12:18:36.072: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to hostname change
*Apr 6 12:18:36.091: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Apr 6 12:18:36.094: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to interface reset
*Apr 6 12:18:36.134: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr 6 12:18:37.090: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Apr 6 12:18:37.122: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr 6 12:18:37.126: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr 6 12:18:38.150: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr 6 12:18:39.149: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Apr 6 12:18:46.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.100.250 peer_port: 5246
*Apr 6 12:18:46.003: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_handshake.c:94 First fragment for seq 2 is missing
*Apr 6 12:18:46.003: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_handshake.c:94 First fragment for seq 2 is missing
*Apr 6 12:18:46.003: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_handshake.c:94 First fragment for seq 2 is missing
*Apr 6 12:18:46.487: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.100.250 peer_port: 5246
*Apr 6 12:18:46.488: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.100.250
*Apr 6 12:18:51.487: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.100.250

 

And it all starts over again

This is the output of en access point:

AP0022.bd1b.70bd#sho version
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 15.3(3)JD16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 05-Jun-18 04:14 by prod_rel_team

ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(18a)JA, RELEASE SOFTWARE (fc4)

AP0022.bd1b.70bd uptime is 19 minutes
System returned to ROM by power-on
System image file is "flash:/c1140-k9w8-mx.153-3.JD16/c1140-k9w8-xx.153-3.JD16"
Last reload reason:

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1141N-E-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FCZ1342W0Z9
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 8.3.143.0
1 Gigabit Ethernet interface
1 802.11 Radio

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:BD:1B:70:BD
Part Number : 73-11451-06
PCB Serial Number : FOC133721VB
Top Assembly Part Number : 800-31652-01
Top Assembly Serial Number : FCZ1342W0Z9
Top Revision Number : A0
Product/Model Number : AIR-LAP1141N-E-K9

 

Configuration register is 0xF

 

4 REPLIES 4
Hall of Fame Cisco Employee

Re: Access point not joining the vWLC (AIR-LAP1141N-E-K9)

Might want to move your thread to the wireless area, you're in the UC area of CSC. 

HTH

java

if this helps, please rate
Highlighted
Beginner

Re: Access point not joining the vWLC (AIR-LAP1141N-E-K9)

How do I that
James Tomahawk
Hall of Fame Community Legend

Re: Access point not joining the vWLC (AIR-LAP1141N-E-K9)

Post the complete output to the following commands:
1. vWLC: sh sysinfo;
2. vWLC: sh time;
3. vWLC: sh license
Beginner

Re: Access point not joining the vWLC (AIR-LAP1141N-E-K9)

check the time have your controller WLC

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards