07-13-2013 06:53 AM - edited 07-04-2021 12:24 AM
Hello everybody !
I have just installed a Cisco ACS 5.4 and I got surprised when I tried to add WCS on "Device Administration". It has a lot of "taks" and I am looking for a way to add it using a script or import file. Anybody know if it is possible ?
task1=Virtual Domain Management
task2=Audit Trails
task3=TACACS+ Servers
task4=RADIUS Servers
task5=Logging
task6=License Center
task7=Scheduled Tasks and Data Collection
task8=User Preferences
task9=High Availability Configuration
task10=Health Monitor Details
task11=System Settings
task12=View Alerts and Events
task13=Email Notification
task14=Delete and Clear Alerts
task15=Pick and Unpick Alerts
task16=Ack and Unack Alerts
task17=Configure Ethernet Switch Ports
task18=Configure WIPS Profiles
task19=Global SSID Groups
task20=WIPS Service
task21=Configure Controllers
task22=Configure Templates
task23=Configure Config Groups
task24=Configure Access Points
task25=Configure Lightweight Access Point Templates
task26=Configure Autonomous Access Point Templates
task27=Scheduled Configuration Tasks
task28=Migration Templates
task29=Configure Choke Points
task30=Configure WiFi TDOA Receivers
task31=Configure Spectrum Experts
task32=Configure ACS View Servers
task33=Configure Ethernet Switches
task34=Auto Provisioning
task35=Monitor Controllers
task36=Monitor Access Points
task37=Disable Clients
task38=Monitor Clients
task39=Monitor Tags
task40=Monitor Security
task41=Ack and Unack Security Index Issues
task42=View Security Index Issues
task43=Monitor Chokepoints
task44=Monitor WiFi TDOA Receivers
task45=Monitor Spectrum Experts
task46=Monitor Media Streams
task47=Monitor Interferers
task48=RRM Dashboard
task49=Config Audit Dashboard
task50=Voice Diagnostics
task51=Mesh Reports
task52=Client Reports
task53=Device Reports
task54=Performance Reports
task55=Security Reports
task56=Network Summary Reports
task57=Compliance Reports
task58=Guest Reports
task59=CleanAir Reports
task60=ContextAware Reports
task61=Voice Audit Report
task62=Report Launch Pad
task63=Run Reports List
task64=Saved Reports List
task65=Report Run History
task66=Configure Guest Users
task67=Location Server Management
task68=View Location Notifications
task69=Maps Read Only
task70=Maps Read Write
task71=Client Location
task72=Rogue Location
task73=Planning Mode
task74=Automated Feedback
task75=TAC Case Attachment Tool
Solved! Go to Solution.
07-13-2013 07:18 AM
In ACS 5.3 and later, you can bulk import. It's located in the same section where you enter the tasks individually.
Sent from Cisco Technical Support iPhone App
07-13-2013 07:18 AM
In ACS 5.3 and later, you can bulk import. It's located in the same section where you enter the tasks individually.
Sent from Cisco Technical Support iPhone App
07-13-2013 07:26 AM
Hi Scott,
Thank you so much!
07-13-2013 07:28 AM
07-13-2013 07:28 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide