Air Ant2440 and Air Ant5160

[matthewlogan46]

Hi,

I have this doubt I can connect the antennas AIR-ANT2440NV-R= and AIR-ANT5160NP-R= in the access points 1262.

Thanks

[Stephen Rodriguez]

Both antenna are for indoor AP with RP-TNC connectors. So they should work on the 1262.

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5160np.pdf

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2440nv.pdf

Steve

Sent from Cisco Technical Support iPhone App

[matthewlogan46]

Ok, thank Stephen Rodriguez.

I had saw those data sheets, but I am not sure.

[George Stefanick]

Something additional to add, Cisco will only support antennas up to 7dBi on the 1260. Anything higher will cause the AP to be out of spec for FCC.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

[Scott Fella]

Here is my 2¢

Since these AP's have 6 ports, 3 on each radio, why not use an antenna like this:

http://www.tessco.com/products/displayProductInfo.do?sku=354980

Or if the ceiling isn't so high, something like this:

AIR-ANT2451NV-R=

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"