cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
741
Views
0
Helpful
4
Replies

AIR-AP2802I SSH Could Not Be Established

fdharmawan
Level 4
Level 4

Hi Guys,

 

In my POC environment, there are 5 AIR-AP2802I APs. I just noticed recently that I can't connect to one of them via SSH, while the other is working fine. All the settings are the same, inherited from global config. When I checked via paping, apparently port 22 is not listening/open. Please see attached picture.

 

Is this some kind of bug? My WLC is 5502 and running on 8.2.166.0.

 

Thank you

1 Accepted Solution

Accepted Solutions

This is what I see in the bug:

Symptom:
* AP is constantly disassociating from the WLC.

* if the AP reboots by itself, it will join back to the controller automatically.

* If the AP does not reboot, console or SSH connections to the AP are not available.

Conditions:

* Normal operations,

Workaround:

* A reboot of the AP momentarily fix the issue

-Scott
*** Please rate helpful posts ***

View solution in original post

4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame
Can be, have you tried rebooting the AP?
-Scott
*** Please rate helpful posts ***

Take a look at this bug id: CSCvi61741
-Scott
*** Please rate helpful posts ***

Hi Scott,

 

I already rebooted the AP several times, no effect. And the bug you attached, the symptom is "1832 stops working when a specific type of Phone is deployed".  No relation to SSH at all.

This is what I see in the bug:

Symptom:
* AP is constantly disassociating from the WLC.

* if the AP reboots by itself, it will join back to the controller automatically.

* If the AP does not reboot, console or SSH connections to the AP are not available.

Conditions:

* Normal operations,

Workaround:

* A reboot of the AP momentarily fix the issue

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: