AIR-CAP3702I-A-K9

[scottharrah]

Deploying some AIR-CAP3702I-A-K9.

They are coming up with medium power (15.4W).  Can this be changed or should we use a PWR injector for more power?

Thanks

[sobhardw]

Apply power to the access point:

a. The access point is 802.3af (15.4 W) compliant and can be powered by any 802.3af-compliant device.

Note The access point is downgraded to 3x3 when it is connected to a 15.4W supply. For the access point to operate at its full potential, using an 802.3at PoE switch or AIR-PWRINJ4 power injector is recommended.

The recommended external power supply for the access point is the Cisco AIR-PWR-B power supply. The access point can also be powered by the following optional external power sources:

– Access point power injector (AIR-PWRINJ5)

– Any 802.3af compliant power injector

[Leo Laohoo]

They are coming up with medium power (15.4W).  Can this be changed 

Depends on the model of your switch.