cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
673
Views
0
Helpful
2
Replies
Beginner

AIR-CAP3702I-A-K9

Deploying some AIR-CAP3702I-A-K9.

 

They are coming up with medium power (15.4W).  Can this be changed or should we use a PWR injector for more power?

 

Thanks

2 REPLIES 2
Cisco Employee

Apply power to the access

Apply power to the access point:

a. The access point is 802.3af (15.4 W) compliant and can be powered by any 802.3af-compliant device.

Note The access point is downgraded to 3x3 when it is connected to a 15.4W supply. For the access point to operate at its full potential, using an 802.3at PoE switch or AIR-PWRINJ4 power injector is recommended.

The recommended external power supply for the access point is the Cisco AIR-PWR-B power supply. The access point can also be powered by the following optional external power sources:

– Access point power injector (AIR-PWRINJ5)

– Any 802.3af compliant power injector

Highlighted
Hall of Fame Community Legend

They are coming up with

They are coming up with medium power (15.4W).  Can this be changed 

Depends on the model of your switch.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards