cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
228
Views
5
Helpful
9
Replies
Highlighted
Beginner

AP 1252 can't connecting to Virtual WLC

Dears ,

i need a help to solve this problem , i have AP 1252 , it was standalone mode , i convert it to LAP i got the IOS from cisco site , i am using virtual WLC , when i connect AP to WLC (10.10.65.100 ) , i got ip address from DHCP , and here  are the error messages that appear :

error opening flash:/capwap-saved-config (No such file or directory)

%Error opening flash:/capwap-saved-config-bak (No such file or directory)

 %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255

%CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.65.100 peer_port: 5246

 DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_handshake.c:94 First fragment for seq 2 is missing

 DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_handshake.c:94 First fragment for seq 2 is missing

%CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.65.100 peer_port: 5246

 %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.65.100

%DTLS-5-ALERT: Received WARNING : Close notify alert from 10.10.65.100

%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.65.100:5246

bsnInitRcbSlot: slot 1 has NO radio

%LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down

%LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

%LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down

%LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

%LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

%CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.65.100 peer_port: 5246

%CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.65.100 peer_port: 5246

%CAPWAP-5-SENDJOIN: sending Join Request to 10.10.65.100

%DTLS-5-ALERT: Received WARNING : Close notify alert from 10.10.65.100

%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.65.100:5246

 

best regards

Everyone's tags (1)
9 REPLIES
VIP Advocate

Re: AP 1252 can't connecting to Virtual WLC

Hi @alalem2010

 Which is the WLC version?  Keep in mind that this AP can´t not join WLC newer then 8.0.252.0.

 

 

-If I helped you somehow, please, rate it as useful.-

Beginner

Re: AP 1252 can't connecting to Virtual WLC

WLC version may not support EOL AP's if it does do a "debug capwap events enable" and have look what information it is showing. But my bet is the firmware version does not support the AP

Beginner

Re: AP 1252 can't connecting to Virtual WLC

is it not compatible ?

Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 8.0.152.0

RTOS Version..................................... 8.0.152.0

Bootloader Version............................... 8.3.15.96

Emergency Image Version.......................... 8.0.152.0

Build Type....................................... DATA + WPS

Hall of Fame Guru

Re: AP 1252 can't connecting to Virtual WLC


@alalem2010 wrote:

%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.65.100:5246

bsnInitRcbSlot: slot 1 has NO radio

 


Please post the complete output to the following commands: 

1.  vWLC:  sh sysinfo; 

2.  vWLC:  sh time; 

3.  AP:  sh version; and 

4.  AP:  sh ip interface brief

Beginner

Re: AP 1252 can't connecting to Virtual WLC

thank you for fast replay, here are the info that you requested :

Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 8.0.152.0

RTOS Version..................................... 8.0.152.0

Bootloader Version............................... 8.3.15.96

Emergency Image Version.......................... 8.0.152.0

Build Type....................................... DATA + WPS

System Name...................................... Cisco_ba:76:e3

System Location..................................

System Contact...................................

System ObjectID.................................. 1.3.6.1.4.1.9.1.1631

IP Address....................................... 10.10.65.100

IPv6 Address..................................... ::

System Up Time................................... 1 days 17 hrs 57 mins 17 secs

System Timezone Location.........................

System Stats Realtime Interval................... 5

System Stats Normal Interval..................... 180

Configured Country............................... US  - United States

State of 802.11b Network......................... Enabled

State of 802.11a Network......................... Enabled

Number of WLANs.................................. 1

Number of Active Clients......................... 0

Burned-in MAC Address............................ 00:50:56:BA:76:E3

Maximum number of APs supported.................. 200

System Nas-Id....................................

WLC MIC Certificate Types........................ SHA1

 (Cisco Controller) >show time

Time............................................. Wed Feb 14 09:49:38 2018

Timezone delta................................... 0:0

APc47d.4f88.cc60>sh version

cisco AIR-LAP1252G-E-K9 (PowerPC 8349) processor (revision C0) with 52214K/13312K bytes of memory.

Processor board ID FCZ1352P05V

PowerPC 8349 CPU at 533Mhz, revision number 0x0031

Last reset from power-on

LWAPP image version 8.0.152.0

1 Gigabit Ethernet interface

1 802.11 Radio

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: C4:7D:4F:88:CC:60

Part Number                          : 73-10425-06

PCA Assembly Number                  : 800-27630-06

PCA Revision Number                  : B0

PCB Serial Number                    : FOC13474FLM

Top Assembly Part Number             : 800-29533-03

Top Assembly Serial Number           : FCZ1352P05V

Top Revision Number                  : A0

Product/Model Number                 : AIR-LAP1252G-E-K9

APc47d.4f88.cc60>sh ip inter brief

Interface                  IP-Address      OK? Method Status                Protocol

BVI1                       10.10.65.19    YES DHCP   up                    up

Dot11Radio0                unassigned      NO  unset  up                    up

GigabitEthernet0           unassigned      NO  unset  up                    up

Hall of Fame Guru

Re: AP 1252 can't connecting to Virtual WLC


@alalem2010 wrote:

Configured Country............................... US  - United States


The vWLC is configured for the US. 


@alalem2010 wrote:

Product/Model Number                 : AIR-LAP1252G-E-K9


The AP has a Regulatory Domain of "-E" (for Europe).  And finally, ...


@alalem2010 wrote:

 (Cisco Controller) >show time

Time............................................. Wed Feb 14 09:49:38 2018

Timezone delta................................... 0:0

 


There is a very big chance the vWLC has an incorrect time.  Kindly configure NTP.  If the time and date is wrong, the AP won't join.

Beginner

Re: AP 1252 can't connecting to Virtual WLC

i am sure the AP time and vWLC are the same time , have i choose another Regulatory Domain else US ?

Hall of Fame Guru

Re: AP 1252 can't connecting to Virtual WLC

Turn off US and enable, say, Germany.
Beginner

Re: AP 1252 can't connecting to Virtual WLC

finally it have joined , i just change (Regulatory Domain) , thank you for help

CreatePlease to create content
Ask the Expert- Firepower configuration & troubleshooting