11-14-2013 11:35 AM - edited 07-04-2021 01:16 AM
Hi All,
I running a WLC with 4.2.0.5 software and AIR-LAP1252AG-T-K9 access points.
After register in WLC the 802.11a radio not working and is showing as "not supported".
What can be happing? My WLC is configured to use "US" contry code.
help please,
Claudio Rezende
11-14-2013 11:57 AM
Your WLC is in regulatory domain North Amerca (-A), but your AP suppose to be in South America or APAC (-T for Brazil or Thaiwan).
If it is on same regulatory domain, you can configur multiple countries on your WLC (in case you have AP in different countries within same region).
Also 1252 to work you should have min 4.2.61.0 sotware version of your WLC (refer table 5 )
HTH
Rasika
**** Pls rate all useful responses****
11-18-2013 03:42 PM
Ok about regulatory domain. I will check this.
About second link, I'm using WLC 4402 with 4.2.205.0 software, not WLC 5500.
Regards,
Claudio
11-18-2013 03:56 PM
Ok, then your software is supported this AP model.Given link is not specific to particular WLC hardware(5508) & it is applicable to all WLC/AP in general.
As long as you get compatible regulatory domain AP, things should work.
HTH
Rasika
**** Pls rate all useful responses ****
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: