cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
172
Views
0
Helpful
2
Replies
Highlighted
Beginner

AP GROUPS in XE IOS 03.03.05.SE not working 3650 controller/switch

Hi All 

So I came across an issue today with creating ap groups in that the configuration just doesn't allow it to work 

AP groups can be created with no problems, AP's assigned to the groups with no problems, however, when you do show ap group you can see it has not assigned a wireless ID. I know this is the issue because only a single SSID is working because it has the WLAN ID on it by my luck that is the actual WLAN ID it was created with. 

Any other wlan's I add to the groups show WLAN ID 0 ...........I don't know why, if someone cold provide some insight that would be great, or if I have missed something on setup.

Debugging shows no errors

I will be upgrading IOS soon to the latest........

Config 

ap group RECEPTION-AREA
wlan Wireless
vlan 995
wlan moreWireless
vlan 145
wlan thesameWireless
vlan 995
 

 

Site Name: RECEPTION-AREA
Site Description: RECEPTION-AREA

WLAN ID   WLAN Name                        Interface
-----------------------------------------------------
0         thesameWireless                         VLAN0995
0         moreWireless                         VLAN0145
1         Wireless                                       VLAN0995

 

 

 

THEY ALL WORK IN THE DEFAULT GROUP

Site Name: default-group
Site Description:

WLAN ID   WLAN Name                        Interface
----------------------------------------------------
3         moreWireless                        VLAN0145
2        thesameWireless                    VLAN0995
1         Wireless                                 VLAN0995

 

 

 

2 REPLIES 2
Highlighted
VIP Mentor

Not sure if it relates to WLAN ID, Try configure a test WLAN with ID >16 & see you can assign it to the AP group you created

HTH

Rasika

Highlighted

HI Rasika 

I have about 18 SSID's all of which add to the AP group with WLAN ID 0 except for the 1st SSID with WLAN ID 1, so yes I can assign WLAN 16 to any group but the ID is still wrong and thus not broadcasting.