AP Groups Misbehavior in 7.0.220.0

[sreejith_r]

Hello Team;

         We are facing a strange issue with one of the controller in WiSM1. If we need to add WLAN ID 7 in the ap groups, then i need to add the WLAN ID's from 1 to 6 .

But for the other controller i can directly add WLAN ID 7.          

Thanks & Regards

Sreejith R

[Scott Fella]

That isn't right and probably is a bug. Have you tried to add the WLAN from the cli?

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here is the CLI command:

In order to create a new AP group/WLAN/interface mapping, use this:

config wlan apgroup interface-mapping add   

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[sreejith_r]

But I couldn't find any bug details from Cisco site regarding the ap groups

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Doesn't mean all bugs are listed. Open a TAC case and they can let you know.

Sent from Cisco Technical Support iPhone App