cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
504
Views
0
Helpful
6
Replies

AP lose configuration after reload

abd88elhak
Level 1
Level 1

Hi,

 

i  have issue  with my cisco access point autonomous, it loses configuration on reload even after saving. thanks for help

 

regards.

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the command "sh version".

hi,

here is the shwo version outpout :

 

AP_08#sh ver
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(25d)JA, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 09-Dec-10 15:08 by prod_rel_team

ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (
fc2)

AC_BERCHID_AP_08 uptime is 1 day, 32 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w7-mx.124-25d.JA/c1130-k9w7-mx.124-25d.JA"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1131G-E-K9    (PowerPCElvis) processor (revision D0) with 25590K/716
8K bytes of memory.
Processor board ID FCZ1449Q0B4
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 58:8D:09:EA:CC:B0
Part Number                          : 73-11587-02
PCA Assembly Number                  : 800-30422-01
PCA Revision Number                  : B0
PCB Serial Number                    : FOC14436163
Top Assembly Part Number             : 800-29582-02
Top Assembly Serial Number           : FCZ1449Q0B4
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131G-E-K9

Configuration register is 0xF

Post the output to the command "sh boot".

AP_08#sh boot
BOOT path-list:      flash:/c1130-k9w7-mx.124-25d.JA/c1130-k9w7-mx.124-25d.JA
Config file:         flash:/config.txt
Private Config file: flash:/private-config
Enable Break:        no
Manual Boot:         no
Enable IOS Break:    no
HELPER path-list:
NVRAM/Config file
      buffer size:   32768
      Mode Button:    on
Radio Core TFTP:

Post the output to the command "sh start".

sobhardw
Cisco Employee
Cisco Employee

Similar post :

https://supportforums.cisco.com/discussion/11800086/upgrading-ios-autonomous-ap-without-losing-startup-config

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card