cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

2407
Views
17
Helpful
17
Replies
Beginner

ok thanks.

ok thanks.

Enthusiast

Have you installed all the AP

Have you installed all the AP's?  If not, your vendor may be willing to trade them back for the 1602I model, that has the built-in omni antenna, which sounds like what you should have gotten in the first place.

Highlighted
Enthusiast

You have no antenna attached

You have no antenna attached at all?  The E models are designed to be used with some form of antgenna, but with nothing attached any signal will be radiated just from the internal connections...  Even the little "stick" antennas will give considerable improvement.

The ADVANTAGE of the E is that you have the capability of "optimizing" the antenna based on your needs.  Simple omnidirectional, to Yagi directional antenna - whatever suits the environment.  But you DO need some antenna or you will get minimal signal.  "I" models have an internal omni built into the case - non-optimal, but simple and normally adequate for many environments.

View solution in original post

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards