cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
423
Views
4
Helpful
4
Replies
Highlighted
Beginner

AP's not joined in WLC 2504

Hi,

Have Cisco WLC 2504 in HA, I tried to connect the Access point CISCO AP AIR-LAP1131AG-E-K9. Access point have taken IP address from DHCP server and able to ping from WLC.

In WLC it's not joined well. Is this AP model support or not by WLC?

In WLC found the log message like "nterference Profile Failed for Base Radio MAC: 7c:0e:ce:b9:10:80 and slotNo: 0"

WLC software version is 7.6.130.0, Already 3 AP's are connected and working fine.

 

Regards,

Sivaguru D

 

4 REPLIES 4
Highlighted
Rising star

https://supportforums.cisco

https://supportforums.cisco.com/discussion/11099501/cisco-4402-lap1131-interference-profile-failed-base-radio-mac

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Highlighted
Beginner

Hi,Initially it was not

Hi,

Initially it was not joined in WLC, we are format (factory reset) the AP then it will connected successfully.

Thanks for your info.

Regards,

Sivaguru D

Highlighted
VIP Mentor

Hi,Yes this AP support WLC

Hi,

Yes this AP support WLC 2504 with 7.6.130.0 image.

Paste the output of these:

From WLC: sh sysinfo

From AP: sh version

also paste the complete bootup process from AP console.

Regards

Don't forget to rate helpful posts

Highlighted
Cisco Employee

Please refer to the link for

Please refer to the link for troubleshooting AP not joining WLC-

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/99948-lap-notjoin-wlc-tshoot.html

Content for Community-Ad