cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

91
Views
0
Helpful
4
Replies
Highlighted
Beginner

AP segregation"

In an environment with WLC, 2 SSID ("a" and "b") and tens of AP, can I have a group of AP that propagates only SSID "a" and another group that propagates both "a" and "b"?
I refer, for example in a production area, where it is necessary only "production" SSID, while in office Area is also required (or only) SSID "offices".

Where can I find help documentation?

C.

4 REPLIES 4
Enthusiast

Hello,

Hello,

Yes you can use AP groups to define what SSIDs will be on which APs

Here is the link  http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_01011011.html

I hope this helps

Don't forget to rate this post ,if you find it helpful

VIP Mentor

Yes, configuring AP group is

Yes, configuring AP group is the way to achieve what you want.

Rasika

Cisco Employee

Refer link : http://www.cisco

VIP Mentor

Hi,

Hi,

By using AP groups , you can achieve this:

Here is the configuration guide guide:

https://rscciew.wordpress.com/2014/01/22/configure-ap-groups-on-wlc/

https://mrncciew.com/2013/05/30/configuring-ap-groups/

Regards

Dont forget to rate helpful posts

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards