In an environment with WLC, 2 SSID ("a" and "b") and tens of AP, can I have a group of AP that propagates only SSID "a" and another group that propagates both "a" and "b"?
I refer, for example in a production area, where it is necessary only "production" SSID, while in office Area is also required (or only) SSID "offices".
Where can I find help documentation?
Yes you can use AP groups to define what SSIDs will be on which APs
Here is the link http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_01011011.html
I hope this helps
Don't forget to rate this post ,if you find it helpful
By using AP groups , you can achieve this:
Here is the configuration guide guide:
Dont forget to rate helpful posts