cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
718
Views
0
Helpful
2
Replies

ap1131ag-a-k9 no power lights

Doc549632
Level 1
Level 1

Hello Everyone,

 

I have a ap1131ag-a-k9 that was running as a standalone AP. It has worked without incident for 2+ years. I disconnected the ap for about a week due to a move. During the reconnects the unit doesn't seem to power on. No Activity lights nothing.

 

I'm using the external power adapter and not POE. I checked the power adapter with a digital multi-meter.

 

Anyone have any ideas.

2 Replies 2

LJ Gabrillo
Level 5
Level 5

Well, it looks like the AP might have been damaged
Considering no status from LED

However, this is just physical
Have you tried to connect a console cable to the AP?
Maybe the LED was just the one that is damaged. CHeck if there are any logs

If all else fails, try to look for a PoE.


Though from the looks of it, the AP might have gone bye-bye

Saurav Lodh
Level 7
Level 7

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1130/installation/guide/1130-TD-Book-Wrapper/113h_c4.html#wp1030793

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: