05-30-2015 07:38 AM - edited 07-05-2021 03:19 AM
Hi everyone,
I have got Cisco AIR-WLC4402-12
Regards
MAhesh
Solved! Go to Solution.
05-30-2015 07:48 AM
It all depends on what software you are going to run. The 440x series can't run anything higher than 7.1 code and that will give you support for the 3602.
Take me a look at the release notes and you'll see what AP are supported.
HTH,
Steve
05-30-2015 09:16 AM
05-30-2015 07:48 AM
It all depends on what software you are going to run. The 440x series can't run anything higher than 7.1 code and that will give you support for the 3602.
Take me a look at the release notes and you'll see what AP are supported.
HTH,
Steve
05-30-2015 07:55 AM
Hi Stephen,
Will this AP work
Image not availablePhotos not available for this variation |
Have one to sell?Sell it yourself |
Regards
MAhesh
05-30-2015 09:16 AM
05-30-2015 10:59 AM
Many thanks Steve.
Regards
MAhesh
06-02-2015 05:45 PM
I would like to inform you that Cisco AIR-WLC4402-12-K9 is End of Sales and the Replacement Product Part Number is AIR-CT5508-12-K9 and for AIR-CT5508-12-K9. Please refer to the link :
https://supportforums.cisco.com/discussion/12157281/air-ct5508-12-k9
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: