ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
192
Views
0
Helpful
1
Replies
Highlighted
Beginner

Backhaul interface in Mesh LAPs

Hello,

Lets say I have two APs in mesh one as RootAP and one as MeshAP.

Backhaul interface is 802.11a. The question is, is it mandatory to have 802.11a network enabled on WLC as well for APs to see each other?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Backhaul interface in Mesh LAPs

The 802.11a network must be enabled or radios on RAPs will be switched off. This doesn't, by default, enable SSID broadcasts over 5GHz yet. Does that answer your question?

View solution in original post

1 REPLY 1
Highlighted
Beginner

Backhaul interface in Mesh LAPs

The 802.11a network must be enabled or radios on RAPs will be switched off. This doesn't, by default, enable SSID broadcasts over 5GHz yet. Does that answer your question?

View solution in original post

Content for Community-Ad