Basic WPA configuration AP 1142n

[c.doelhoffs]

Hi All,

I'm looking for a basic WPA configuration for AP1142n. This should allow connections upto 300 Mbps. Best should be a script config.

Authentication should be local radius server.

Thanks for your help.

Regards,

Christian

[Scott Fella]

You need to use WPA2/AES along with 40mhz channel width and WMM enabled in order to achieve up to 300mbps. This is the 802.11N standard when using WPA2.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Is this an IOS AP or do you have a WLC? There are many sample configurations on the cisco website.

Sent from Cisco Technical Support iPhone App

[c.doelhoffs]

Hi Scott,

Thank you for your answer. It's an IOS (standalone).

By the way, is there some paper explaining how to configure a Cisco AP 1142n ? Further I would like to inprove my knowledge of the configuration of such device.

Regards,

Christian

[Surendra BG]

Hi,

Here is the configuration example link..

https://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#ent

BTW , Scott covered everything...

Regards

Surendra