I have two Aironet 1242AG access points. Currently, one of those access points is in use with an SSID of ABCWIFI.
I want to extend the wireless network to an area that can't be reached by copper or fiber. So, I've purchased another 1242AG. What I'm not sure of is how to configure it. Should I use it as a repeater or in a root-bridge/non-root bridge configuration?
What I'm most confused about is, what do I do with the second radio? Do I use the 5Ghz as the "backhaul" with a completely separate SSID and then broadcast the normal SSID over the 2.4Ghz? Or, do I even use the second radio at all? The key is that the same SSID is used in all locations because the devices in use need to move seemlessly between access points.
How far is your existing access point and where you plan on putting your new AP. Also can these APs both see each other with no obstructions .. ?
__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin __________________________________________________________________________________________ "I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
The Ap lose ip static, we thought the Ap was not able to communicate with the WLC with assigned static IP address. When this happens the ap will fall back ti trying ti get a DHCP address.This occur randomly in platform controller 2504 with AP's model AIR-...
Dear Friends, I have to upgrade IOS in 5520, here my question was how to identify which FUS was installed in the WLC.GUI ----Software Version 18.104.22.168Emergency Image Version 22.214.171.124 -------sh sysinfo Product Version....................
Security has become one of the greatest concerns for every company alike. The industry is moving towards a fast paced and customer-oriented network infrastructure which automatically increases the vulnerabilities a network is exposed to. As the industry t...
We got some new Apple Macbook Air, when connected to wifi, we found the link speed was only 54Mbits, but other laptops like DELL or Panasonic were working fine, the link speed was at least 800 Mbits. we are using Cisco WLC 5504 and 2702I ap.and the funny ...