can we combine two different AP models and also different regulatory domain in same MESH network:
AP 1552E with regulatory domain C (China, in 5Ghz band, it has 5 channels: 149, 153, 157, 161, 165)
AP 1572E with regulatory domain F (Indonesia, in 5Ghz, it has 4 channels: 149, 153, 157, 161)
WLC SW version 8.1
1. Can We combine those two AP in single MESH bridge group?
2. Is there any potential problem if we put AP 1572 domain F as RAP and AP 1552 domain C as MAP? The logic is channel will be driven by RAP, so it will avoid to use channel 165 as backbone MESH, is it correct logic?
3. Is there any potential problem to combine AP 1552 and AP 1572 model in single MESH network since they have different capability?
We want to broadcast a SSID (and allow users to connect) between certain times each day, and then take it offline. Unfortunately we dont have prime and only DNA Essential Smart licencing. All documents that I am seeing is that its possible if you have pri...
Hi all,I am looking for some guidance here, and I am quite certain that some of you, great minds, will be able to stir me in the right direction here. And a big thanks in advance. Here we go, i have three sites connected over private link MPLS....
Hi to all I purchase new AP C9120AXE converted to EWC.I notice when AP is booting a message related to default route not set that it says that can affect performance.Message is : %Default route without gateway, if not a point-to-point interface,...
Hi all, I am trying to convert AIR-AP2802I-B-K9 from CAPWAP to ME using this guide https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guide/getg_start.html#task_7588F4C009744AEFBB9EB754A713E390 I...
Hi All, Currently i have a 9800-cl wlc with 2700, 3800 and 9100 series access points (internal APs). All three APs broadcast same SSID with (WPA2/PSK) for come legacy clients which operates on 802.11b. Also I'm using the same RF, site and p...