CAP2702I AP telnet enable via WLC GUI

[Shivu b]

Hello All,

How to enable the telnet for AP CAP2702I from WLC GUI ? and which are all  Access points models aren't allow  remote access?

[GRANT3779]

Assuming you just want to allow telnet access and already have the config etc.. on place on the AP then I do the following -

WLC - Wireless / All APs / Select AP / Advanced / 

You then have Telnet and SSH options for AP specific or Global. Hit the check box.

[Scott Fella]

You also can define telemetry or ssh globally along with the username and password:

WIRELESS | ALL ACCESS POINTS | GLOBAL CONFIGURATION

-Scott 

*** Please rate helpful posts ***