We are running a WLC 5508 and we seem to be having a hard time casting to Apple Devices. Android Devices - no problem.
Running Firmware / Software Version 188.8.131.52
Our issue is that Apple products (iPhone) can go through the set-up process of their Chromecast, but it does not show up as part of their “home” nor can they cast to the device using apps such as YouTube and Netflix. The same Chromecast can be set-up through an Android device, shows up in their “home” and can cast to the device using YouTube and Netflix.
The Chromecast and other wireless devices are on the same subnet and we can see that the Chromecast device does have the correct IP address for the subnet.
mDNS is configured on our controller and the Chromecast’s MAC Address shows up under the “_googlecast._tcp.local.” service string.
The IOS device that we used for testing is on the latest IOS version and still cannot cast to the Chromecast.
The Chromecast used in testing has the latest firmware.
We also Added the service strings for AirTunes and AppleTV to the mDNS. We also have Multicast enabled on our SSID. We do not have a password associated with the SSID though - it's open.
Enable Global Multicast Mode and IGMP Snooping are enabled.
In the logs -
Bonjour_Process_Task: Sep 18 09:33:03.467: CLIENT LOCATION / ROLE / USER-ID DENIED ACCESS TO SP .........
*Bonjour_Process_Task: Sep 18 09:33:05.063: CLIENT LOCATION / ROLE / USER-ID DENIED ACCESS TO SP ......... = Google-Home- ._googlecast._tcp.local.
Has anyone experienced the same issues ? Any Suggestions ?
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 184.108.40.206, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...
Hey Guys,I Have several 1600 Series AP's (AIR-CAP1602I-ZK9) that was working with WLC before, I changed them with 1800 series but would like to use 1600 Access Points series independently and without WLC for somewhere else, so I want to know do they...
This event was scheduled for September 23rd, but it has been moved to November 10 due to complex and unexpected circumstances. We apologize for all the issues this may cause.
Community Live- All Things LTE…4G, 5G and Whatever’s Next
(Live event - formerly...