cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
495
Views
5
Helpful
5
Replies
Highlighted
Beginner

Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point multiple ssid see other arp request

Hi All,

 

I am using Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point. I have created 

3 ssid on it. My problem is test1 ssid broadcast arp request is seeing on test2 ssid. 

 

Is there any way to disable this.

 

Thank you all in advance 

5 REPLIES 5
VIP Engager

Re: Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point multiple ssid see other arp request

Are the two SSID attached to the same VLAN?
What software version are you running on the AP/ME?
Beginner

Re: Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point multiple ssid see other arp request

Hi,

Both SSID on different VLAN and software version 8.5.140.0 

VIP Engager

Re: Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point multiple ssid see other arp request

Interesting, could you create a pcap on both testclients and upload it here with the ARP packages in it?
Beginner

Re: Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point multiple ssid see other arp request

Hello,

FYI,

 

 

It was bug in Cisco 2800 as per the think link.

 

https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3800-series-access-points/214491-arp-responses-for-default-gateway-ip-add.html

 

We upgrade our software from 8.5.140.0 to 8.5.151.0 and it resolved the issue

VIP Engager

Re: Cisco 2800 AIR-AP2802I-A-K9 use in standalone mode as a controller and access point multiple ssid see other arp request

Thanks for posting the solution.
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards