CISCO 2802I AUTONOMOUS CONFIG TO WLC 3504

[jeremy.cordero@grouppbs.com]

I have a Cisco AP2800i running as an autonomous and I want to replace it with a Cisco WLC 3504. Is there any way to transfer the 2800i configurations to the new 3504?

Both are running 8.5.131.0 firmware versions.

[Daniel Ordóñez Flores]

Hi jeremy.cordero@grouppbs.com

First, you need to convert you Autonomous AP to LWAP AP you can find the image right here.

You can find many posts that will show you how to convert your AP. And Finally you cannot transfer directly your configuration, you must map your 2800 configuration to WLC 3504.

If you need help in the process, please let we know.

***Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *

[jeremy.cordero@grouppbs.com]

Thanks Daniel. I'll try it and let you know!