09-16-2005 07:00 AM - edited 07-04-2021 11:08 AM
Hi to all.
I have configured the wireless part of my router 877W. Right now i am using WEP only but i want to setup WPA (with pre shared key) for a more secure access. I am a wireless noob and i haven't much knowledge about this configuration process / options.
Please can some one tell me the correct steps to configure a working WPA authenticated wireless lan with a simple WPA-PSK key (not radius)?
I was using Web interface (Wireless security Express option of the Wireless WEB application) for the confguration not IOS CLI commands.
Thank you very much.
Solved! Go to Solution.
09-17-2005 05:51 AM
Set the Security|encryption | Cipher for AES + TKIP
Set Security | SSID Manager | Methods for "Open" (only)
Check the box for Key Management for "mandatory"
Check the box for WPA
Enter a Key
As with WEP, the keys on the AP and the keys on the clients must match exactly (case, spaces, everything).
Good Luck
Scott
09-17-2005 05:51 AM
Set the Security|encryption | Cipher for AES + TKIP
Set Security | SSID Manager | Methods for "Open" (only)
Check the box for Key Management for "mandatory"
Check the box for WPA
Enter a Key
As with WEP, the keys on the AP and the keys on the clients must match exactly (case, spaces, everything).
Good Luck
Scott
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: