Jesus,
Looking at the config, it could be that it's too large. A couple of thigs you could look at:
- You might want to try changing your ACL 50, to use VLSM vs listing every IP that is allowed to manage the AP.
- And with that many mac addresses, you might want to look into using an external server, IAS/NPS if you're a windows domain, to ease up the config on the AP itself.
HTH,
Steve
----------------------------------------------------------------------------------------------------------
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered