cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
0
Helpful
2
Replies

Cisco Aironet 2702i-i-k9

Stas Balabanov
Level 1
Level 1

Hello,

I've got this device Cisco Aironet 2702i-i-k9

Web interface is closed - is there a way to enable it (or must I have a console access to it)? 

Does this devise work in standalone mode? 

Thanks.

2 Replies 2

Scott Fella
Hall of Fame
Hall of Fame

You probably have a lightweight AP so you will not be able to hit the GUI. You need to console into the AP to verify that it is lightweight or not. If it's not, then you will need to configure it and using the cli, is the easiest way. 

Simce I believe it is a lightweight AP, you would need to convert it to autonomous in order to use it as a standalone access point. You would need to have access to download the image however to be able to convert this AP. Here is a link:

https://supportforums.cisco.com/video/11928901/lwapp-lightweight-mode-autonomous-conversion-and-vice-versa

You can find more by searching for Cisco lightweight to autonomous convention.

-Scott

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***

Here are some other links to configure the AP. 

You might want to try this if it's a brand new AP out of the box:

http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html#pgfId-139705

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html

-Scott 

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: