Cisco Ap from Autonomous to lightweight

[spinning2008]

Hello,

I need help to convert Cisco AP 1130 from  Autonomous to lightweight.

Appreciate your help.

Regards.

[hkumarsh]

Hi Mauron,

here you go

1. download Lwapp/capwap image from cisco.com for AP1130.

2. use copy command on AP console and xtract it. (downloading from TFTP server)

3. you can now delect IOS image from the AP

4. reboot the AP.

or

you upgrade tool.

Thanks

[Vinay Sharma]

Mauro,

As Hemant correctly mention, you can refer the same steps in the document mentioned below:-

https://supportforums.cisco.com/docs/DOC-15126

Hemant for correct information 5+ :-).

Thanks,

Vinay