Cisco Express Mobility Controller (1850)

[sejelmohajj]

Team,

We Have Cisco Express Mobility Controller (1850), does it support Integration with Cisco ISE for  Employee (Access to Internal Network) and Guest  (Access to Only Internet) with ISE Portal.

Regards

[Flavio Miranda · Accepted solution]

Hi,

 The correct question is 'does it supports external RADIUS?'

YES, it does. I mean, not only ISE but also ISE.

 Take a look on the docs. 

-If I helped you somehow, please, rate it as useful.-

[sejelmohajj · Accepted solution]

Yes It support External Radius, but how about Guest Access with Cisco ISE Portal.

[Flavio Miranda · Accepted solution]

It is the same logic. 

See here:

"A number of WLAN Security options are supported on Cisco Mobility Express solution and are outlined below:

OpenP

WPA2ersonalP

WPA2nterprise (External RADIUS, AP) 

For Guest WLAN, a number of capabilities are supported:C

CMXGuest Connect 

WPA2 Personal 

Captive Portal (AP)

 CaptivePortal (External Web Server)

-If I helped you somehow, please, rate it as useful.-

[sejelmohajj]

How about coa or url redirection ? , I have integrated my other 5520 controller using couple of Access list one for redirection and another one for Internet Only Access.

[Flavio Miranda · Accepted solution]

You may want to take a look here:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_Mobility_Express_Deployment_Guide/b_Cisco_Mobility_Express_Deployment_Guide_chapter_0100

-If I helped you somehow, please, rate it as useful.-

[Scott Fella · Accepted solution]

Mobility Express is for quick and simple installs. They have limited features also. Just like with other manufacturers, if your requirements are feature rich, then use a controller.
You can probably get a WLC 2504 or the WLC 3504.