cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

852
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cisco Mobility Express AP join problem

Hello everyone,

I am mostly security guy so this is my first wireless setups and therefore sorry for any misunderstanding and etc in advance.

We have recently bought 4 AIR 1850i devices. I got one of them out of box and started configuration. I changed image from lightweight to mobility expres 8.3.150.0. Processed initial setup through web interface. After reboot I entered WLC gui but do not see any access point in list. I think i must see internal AP of ME. I got into debugging both WLC and AP and post results below: WLC is 172.20.201.1 and Internal AP is 172.20.201.40

 

WLC: show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.3.150.0

System Name...................................... ASB Wireless ME Master 1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2250
IP Address....................................... 172.20.201.1
Last Reset....................................... 0: unknown

System Up Time................................... 0 days 0 hrs 40 mins 55 secs
System Timezone Location......................... (GMT +4:00) Muscat, Abu Dhabi
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... US - United States

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2

 

AP: show ver

-----------Omitted-----------

ROM: Bootstrap program is U-Boot boot loader
BOOTLDR: U-Boot boot loader Version 31

APyyyy.yyyy.yyyy uptime is 0 days, 0 hours, 44 minutes
Last reload time : Thu May 23 10:07:14 UTC 2019
Last reload reason : unknown

cisco AIR-AP1852I-E-K9 ARMv7 Processor rev 0 (v7l) with 967420/510316K bytes of memory.
Processor board ID KWC----4AM
AP Running Image : 8.3.150.0
Primary Boot Image : 8.3.150.0
Backup Boot Image : 8.3.143.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
2 Gigabit Ethernet interfaces
2 802.11 Radios
Radio FW version : c5d7990641242346243679e5c30b
NSS FW version : NSS.AK.1.0.c10-00017-E_custC-1.67978.1

Base ethernet MAC Address : yy:yy:yy:yy:yy
Part Number : 0-0000-00
PCA Assembly Number : 074-!!!!!!!-03
PCA Revision Number : 01
PCB Serial Number : KWC-------
Top Assembly Part Number : 074-13149-03
Top Assembly Serial Number : KWC-------
Top Revision Number : A0
Product/Model Number : AIR-AP1852I-E-K9

 

WLC: show time

Time............................................. Thu May 23 15:13:28 2019

Timezone delta................................... 0:0
Timezone location................................ (GMT +4:00) Muscat, Abu Dhabi

NTP Servers
NTP Polling Interval......................... 60

Index NTP Key Index NTP Server Status NTP Msg Auth Status
------- ----------------------------------------------------------------------------------------------
1 0 10.124.0.36 In Sync AUTH DISABLED

 

AP:show clock

*15:14:05 GST Thu May 23 2019

 

WLC:show ap join stats summary all

Number of APs.............................................. 1

Base Mac AP EthernetMac AP Name IP Address Status
XXXXXXXXXX YYYYYYYYYYY APYYYY.YYYY.YYYYY 172.20.201.40 Not Joined

 

WLC:show ap join stats detailed 

Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable

Discovery phase statistics
- Discovery requests received.............................. 45
- Successful discovery responses sent...................... 45
- Unsuccessful discovery request processing................ 0
- Reason for last unsuccessful discovery attempt........... Not applicable
- Time at last successful discovery attempt................ May 23 15:14:57.729
- Time at last unsuccessful discovery attempt.............. Not applicable

Join phase statistics
- Join requests received................................... 45
- Successful join responses sent........................... 45
- Unsuccessful join request processing..................... 0
- Reason for last unsuccessful join attempt................ Not applicable
- Time at last successful join attempt..................... May 23 15:15:07.307
- Time at last unsuccessful join attempt................... Not applicable

Configuration phase statistics

--More-- or (q)uit
- Configuration requests received.......................... 90
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 45
- Reason for last unsuccessful configuration attempt....... Invalid License in configuration request
- Time at last successful configuration attempt............ Not applicable
- Time at last unsuccessful configuration attempt.......... May 23 15:15:07.469

Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable

Last AP disconnect details
- Reason for last AP connection failure.................... Not applicable
- Last AP disconnect reason................................ Unknown failure reason

Last join error summary
- Type of error that occurred last......................... Lwapp configuration request rejected
- Reason for error that occurred last...................... Invalid License in configuration request
- Time at which the last join error occurred............... May 23 15:15:07.469

AP disconnect details
- Reason for last AP connection failure.................... Not applicable
Ethernet Mac : 00:29:c2:2e:44:30 Ip Address : 172.20.201.40

Everyone's tags (5)
1 REPLY 1

Re: Cisco Mobility Express AP join problem

Hi @aehtibarov 

 

You have to keep other three APs in a same network and need to perform the steps for Adding APs in to Mobility Express

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards