cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
279
Views
10
Helpful
2
Replies
Highlighted

Cisco Virtual Wireless Controller

Hello,

 

I need to know how the physical connection to cisco Virtual Controller vWLC will be, because I need to know about the reduction.

Example of the image below the reduction and physical connection between 3504/5520/8500 controllers.

I put an image attached.

How will vWLC look like this?

2 REPLIES 2
Highlighted
Hall of Fame Master

The vWLC doesn’t support SSO only N+1. The image you have provided is for SSO and only supported on the appliance that is mentioned.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-4/config-guide/b_cg84/high_availability.html#vwlc-and-nplus1-ha
-Scott
*** Please rate helpful posts ***
Highlighted
VIP Mentor

Its not for vWLC.

 

you nee dto download this image:https://software.cisco.com/download/home/284464214/type/280926587/release/8.10.130.0

 

and setup it as N+1.

deployment guide:  https://ccieroot.com/2016/02/20/installation-of-virtual-wireless-controller-vwlc/

 

Regards

Dont forget to rate helpful posts

Content for Community-Ad

This widget could not be displayed.