Cisco WLC 3504 AP support

[medi_pathan]

Hi 

i am planning to deploy Cisco WLC 3504 controller in my office, i am confuse about the number AP Support in controller. 

1- what is the maximum AP support in 3504? 

a- 150 AP's (as mentioned in datasheet)

b- 100 Flexconnect group and per group 100 AP's = 10,000 ?

c- what is the maximum license i can buy for controller?

thanks 

Medi Pathan

[Sandeep Choudhary]

Hi,

1- what is the maximum AP support in 3504?  150APs

a- 150 AP's (as mentioned in datasheet)

b- 100 Flexconnect group and per group 100 AP's = 10,000 ? Yes thats right but you join max 150 AP to this WLC.

c- what is the maximum license i can buy for controller? 150APs 

Regards

Dont forget to rate helpful posts

[medi_pathan]

thanks Sandeep Choudary. 

what i under stand from the datasheet is that we can configure 100 Flexconnect Group and maximum 100 AP's can associate with single group but in any case we wont be able to configure more then 150 active AP's because it is beyond Controller capacity.

[Sandeep Choudhary]

Corerct, means you will need Max 2 Groups (If you have 150 APs active).

Regards

Dont forget to rate helpful posts

[medi_pathan]

thanks Sandeep :) its clear now