We have a current Wireless setup with WLC 4404 and Cisco LAP1242AG-N-K9 Access Point with External Antena AIR-ANT24020V-R.Now we want to purchase Cisco WLC 5508 with Access Point AIR-CAP2702E-x-K9 and External Antena AIR-ANT2524V4C-R= for 2.4 Ghz and 5 Ghz for 802.11 a/b/g/n/ac .
1:Can we run it with mixed mode like the device which has 802.11ac/N Compatible run with 802.11 ac/n mode and device has 802 11.B/G run with 802 11.B/G mode ?
2.We will run our all Cisco LAP1242AG-N-K9 Access Point with External Antena AIR-ANT24020V-R through Cisco WLC 5508 please confirm
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 22.214.171.124, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...