cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

74
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cisco2504 N+1 setup query

Hi guys,

 

i have 2 cisco 2504 deployed in N+1 setup. Primary controller is having 60 AP License and secondary have 5 AP License ( As per Cisco, they recommends in N+1 setup, secondary WLC should have atleast 5 AP Licenses)

 

Currently 55 APs are associated to Primary WLC.

 

i have already tested failover in this setup , by rebooting Primary one all 55 APs associated to secondary WLC.

 

But here i have a question that can we shift 10-15 APs on secondary WLC??

 

Purpose is we are going to upgrade both WLC to new 8.5.151 image. We will first upgrade secondary WLC , And then will move APs from Primary to secondary in batchwise (sitewise), So after associating all APs on secondary will upgrade Primary WLC.

Can any one have idea on this approch?

 

Everyone's tags (1)
1 REPLY 1
Hall of Fame Master

Re: Cisco2504 N+1 setup query

That’s will work and is a process I have used. You have verified that the AP’s can failover which is good. I would push the new code on to both wlc and then on the primary, you push the image to the AP’s. While that is happening, reboot the secondary wlc so that is boots from the new image. Then move your AP’s strategically to the secondary.
-Scott
*** Please rate helpful posts ***
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards