cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

451
Views
9
Helpful
2
Replies
Highlighted
Beginner

CLI command to find Native Vlan of all APs

Is there any command to find the Native Vlan (configured under FlexConnect tab) of ALL access points in WLC?

I have a Flex7500 and running code 8.0.120.0

Thanks,

Mehdi

2 REPLIES 2
VIP Mentor

Since this configuration is

Since this configuration is AP specific you need to check this in each AP. Below CLI should help

(2504) >grep include Native "show ap config general <AP-NAME>" 
Press any key to continue..y
AP Native Vlan ID: .............................. 1
Native Vlan Inheritance: ........................ Group
Native ID :..................................... 1

HTH

Rasika

*** Pls rate all useful responses ***

Beginner

Thanks for your answer!

Thanks for your answer!

When you have 4000 APs on controller, it's gonna be difficult to check one by one.

Someone from TAC recommended me to use WLC Analyzer which give a better view than CLI commands.

Thanks anyways...

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards