cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
153
Views
5
Helpful
9
Replies
Participant

command of controlleur

Hello

what are command that allow to configure 

 AP Country code.
AP Regulatory Domain............................. Unconfigured 

 

in moblity express 1815i !!???????,    that allow AP joind to controlleur 

 

Cisco Controller) >show ap config 802.11a AP28AC.9E89.48E0AP28AC.9E89.3DB8

Cisco AP Identifier.............................. 5
Cisco AP Name.................................... AP28AC.9E89.3DB8
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-AB
AP Country code.................................. -
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 28:ac:9e:89:3d:b8
IP Address Configuration......................... DHCP
IP Address....................................... Disabled
Telnet State..................................... Globally Disabled
Ssh State........................................ Globally Disabled
Virtual IP Address............................... Not Configured
Cisco AP Location................................ default location
Cisco AP Floor Label............................. 0
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Guru

Re: command of controlleur

AP Regulatory Domain cannot be changed.
If the AP has the wrong Regulatory Domain, contact the vendor and ask for the AP to be swapped out with the correct Regulatory Domain.
VIP Mentor

Re: command of controlleur

Configiure the country code as LEO mentioned. With country code AP will not join to it!

 

Regards

Dont forget to arte helpful posts

9 REPLIES 9
Cisco Employee

Re: command of controlleur

From the WLC CLI,

(Cisco Controller) >config ap country US ?

<Cisco AP>     Enter the name of the Cisco AP.
all            Configure all the Cisco APs.

(Cisco Controller) >


Participant

Re: command of controlleur

For  AP Regulatory Domain............................. Unconfigured 

 

how i can configured ????????? that allow AP joind to conrolleur molity express 1815i !!!???????

 

 

thanks in advance  

Everyone's tags (1)
Participant

Re: command of controlleur

For  AP Regulatory Domain............................. Unconfigured 

 

how i can configured ????????? that allow AP joind to conrolleur molity express 1815i !!!???????

 

 

thanks in advance  

Everyone's tags (1)
Hall of Fame Guru

Re: command of controlleur


@dhikra wrote:

how i can configured ????????? that allow AP joind to conrolleur molity express 1815i !!!???????

Please read THIS.

Participant

Re: command of controlleur

Spoiler
 

or  AP Regulatory Domain............................. Unconfigured 

 

how i can configured Regulatory Domain  in acces point 1815 !!

 

thanks in advance 

Everyone's tags (1)
Hall of Fame Guru

Re: command of controlleur


@dhikra wrote:

how i can configured Regulatory Domain  in acces point 1815 !!

Please read > THIS <.

Highlighted
Participant

Re: command of controlleur

 

 THIS for  : AP Country code 

From the WLC CLI,

(Cisco Controller) >config ap country US ?

<Cisco AP>     Enter the name of the Cisco AP.
all            Configure all the Cisco APs.

(Cisco Controller) >

//////////////////////////////////////////////

 

But Also i would other command forAP Regulatory Domain !!

if i configured code country  in acce point then i would tho know if  AP Regulatory Domain  is show automatic  !!!!!!!!!

Everyone's tags (1)
Hall of Fame Guru

Re: command of controlleur

AP Regulatory Domain cannot be changed.
If the AP has the wrong Regulatory Domain, contact the vendor and ask for the AP to be swapped out with the correct Regulatory Domain.
VIP Mentor

Re: command of controlleur

Configiure the country code as LEO mentioned. With country code AP will not join to it!

 

Regards

Dont forget to arte helpful posts

CreatePlease to create content
ask the Expert- Cisco's Branch Routing Portfolio