03-30-2007 06:13 AM - edited 07-03-2021 01:51 PM
Hi!!
Im looking for Sample config or Config guide for Implimenting WiSM on Catalyst 6500 and 20 AP's 1130 accross mulitple buildings.
03-31-2007 09:07 AM
Hi Ivan,
Here is some info for the WISM,
Cisco Catalyst 6500 Series Wireless Services Module (WiSM) Introduction
http://www.cisco.com/en/US/products/ps6526/index.html
Configuring a Cisco Wireless Services Module
From this excellent doc;
http://www.cisco.com/en/US/products/hw/modules/ps2706/prod_technical_reference09186a0080702fe2.html
WiSM Troubleshooting FAQ
http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a00806e39b7.shtml
Cisco Catalyst 6500 Series Wireless Services Module Q & A
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_qanda_item0900aecd8036434e.shtml
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community