CT5508 and AP1142 flexconnect mode ACL

[Seok-hwan Kim]

I have a problem.

- CT5508 and AP1142 flexconnect mode

- SSID Data locally swtiching with FlexConnect Access Control Lists

uw_14f_ap1142#sh access-lists
Extended IP access list Test_0429
    10 permit udp any range 0 65535 any eq bootps (1 match)
    20 permit ip any host 0.0.60.0 (1 match) -  If there is not this alc rule "0.0.60.0", Clients do not receive the assigned IP.

What's mean the IP address 0.0.60.0 ?

[Rasika Nayanajith]

Pls take a screen capture of below on your WLC GUI and post it here. So we can get an idea how this ACL is written.

Wireless > FlexConnect Group > FlexConnect ACLs > Test_0429

HTH

Rasika