I need assistance in developing a acl that can block a computer on the LAN from accessing the internet from midnight to 7am everyday. The router is a 857W, the computer is 192.168.2.33 the internal gw 192.168.2.254 (dialer 1 is 184.108.40.206). acl 101 deny tcp host 192.168.2.33 eq www
what I need to figure out is how to add a time based acl to just this computer.
As per your query i can suggest you the following solution-
Time-Based ACLs Using Time Ranges
Time-based ACLs were introduced in Cisco IOS Software Release 12.0.1.T. While similar to extended ACLs in function, they allow for access control based on time. A time range is created that defines specific times of the day and week in order to implement time-based ACLs. The time range is identified by a name and then referenced by a function. Therefore, the time restrictions are imposed on the function itself. The time range relies on the router system clock. The router clock can be used, but the feature works best with Network Time Protocol (NTP) synchronization.
These are time-based ACL commands.
!--- Defines a named time range.
!--- Defines the periodic times.
periodic days-of-the-week hh:mm to [days-of-the-week] hh:mm
!--- Or, defines the absolute times.
absolute [start time date] [end time date]
!--- The time range used in the actual ACL.
ip access-list name|number time-rangename_of_time-range
In this example, a Telnet connection is permitted from the inside to outside network on Monday, Wednesday, and Friday during business hours:
We are pleased to announce the immediate availability of the IOS-XE release 17.2.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
Everyone likes to go fast. The speed of your business, your network and your Wi-Fi is critical to how quickly you can move forward.
In this latest generation of wireless networking, Wi-Fi 6, speed is a focus, but it’s not about just individual devi...
My report tells you the experimental results of the performance of Cisco ClientLink supported on Cisco Aironet access points. You can remember the great performance of ClientLink forever.I have learned that new access points for IEEE802.11ax are Cisco ...
Join us live on Tuesday, March 3 at 10:00 am PT (and on demand after) to learn about how Wi-Fi 6 and 5G will change the wireless landscape in the enterprise? We'll be talking to Cisco's wireless CTO, Matt MacPherson, who will dive into each of t...
Join us live on Tuesday, March 3 at 10:00 am PT (and on demand after) to learn about how Wi-Fi 6 and 5G will change the wireless landscape in the enterprise? We'll be talking to Cisco's wireless CTO, Matt MacPherson, who will dive into each of these techn...