cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1649
Views
0
Helpful
8
Replies
Beginner

Disable WebAuth Successful login screen on 1.1.1.1

We're using an external redirect URL and external RADIUS for our webauth setup and it all works fine.

I need to disable the popup page you get from a successful authentication after posting to 1.1.1.1/login.html and RADIUS succeeds

See attached image.

Do you have any ideas?

We have a 2504 on v7.6

Thanks

James

8 REPLIES 8
Rising star

Please refer to the link-http

Please refer to the link-

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html

Beginner

HiThat guide does not have

Hi

That guide does not have any information that answers my question. We are using an external captive portal page, so cannot customise the internal login/logout pages. We just want to disable the login success page completely

Thanks,

James

Hall of Fame Community Legend

That guide does not have any

Oops.

Beginner

The image you posted looks

The image you posted looks like the default Cisco Web Auth Successful page, which is internal.  When external web page authentication is successful it should redirect the user to the configured redirect URL or the page the client tried to get to.

Could you verify the address that your redirect URL is configured to and post your custom external server captive portal code?

If you haven't already there is this document on configuring external web auth as well:

http://tinyurl.com/nkxeaxf

Thank you,

John

Beginner

Thanks for the link, but it

Thanks for the link, but it doesnt contain the answer.

Thanks

James

Cisco Employee

 Ensure that the Scripting

 

Ensure that the Scripting option is blocked/unblocked on the client browser as the customized web page on the WLC is basically an HTML script. On IE 6.0, this is disabled by default for security purposes.

The Pop Up blocker needs to be enabled on the browser if you have to block any Pop Up messages for the user.

Highlighted
Beginner

Near the end of the below

Near the end of the below document you will find the "Using the GUI to Assign Login, Login Failure, and Logout Pages per WLAN" section.  This may help you with your issue.

http://tinyurl.com/l7zrpoo

I hope this helps.

John

Cisco Employee

You can disable the logout

You can disable the logout popout with "config custom-web logout-popup disable"
CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards