Do I need a WLC for Client Roaming?

[Tim K]

I currently have a Cisco AP running in adhoc mode. I want to expand my coverage in my house, and allow for seamless roaming. Do I need a WLC to do that? Or can I run two APs in adhoc mode and roam between them? If so, are there any specific configurations I need have on the APs to allow it, and what are they?

Thanks,

[Leo Laohoo]

Or can I run two APs in adhoc mode and roam between them?

As long as there is enough signal OVERLAP between the two then it is possible. 

[Tim K]

Is any additional configuration required for it? Would they have to be on the same channel?

[Leo Laohoo]

Would they have to be on the same channel?

Most definitely not.  

[mohanak]

Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap12-wdsroam-rm.html#pgfId-1035854

https://learningnetwork.cisco.com/thread/23064