When enabling TCP MSS under Wireless > Access Points > Global Configuration, will the APs reboot when I click apply?
Also, under Cisco's WLC Configuration Best Practices, it says: "In general, a 1300 bytes value is a good average, although it can be further optimized depending on your setup.".
Does that still hold true, should I set it to 1300?
Thanks in Advance,
Solved! Go to Solution.
good documetnt for reference :
when you enable TCP-MSS Globally, a reboot is required
I believe the command to show the TCP-MSS is > show AP tcp-mss- adjust all
I hope this helps