cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2588
Views
5
Helpful
4
Replies
Highlighted
Beginner

Enabling Wireless Roaming Between Standalone AP

Hello All,

     I'm about to purchase 2 Aironet APs, either 1140 or 1160 Series for a small Business. I know too little about the AP installation. Can someone guide me how to let both APs works in Roaming Mode so that users can move freely within the site without having to drop and connect from one AP to the other.

Best Regards,

Islam M. Nadim

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Re: Enabling Wireless Roaming Between Standalone AP

So long as the ssid and encryption are the same, and there is overlap between the cells the client should roam between the AP.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

View solution in original post

4 REPLIES 4
Highlighted

Re: Enabling Wireless Roaming Between Standalone AP

So long as the ssid and encryption are the same, and there is overlap between the cells the client should roam between the AP.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

View solution in original post

Highlighted
Beginner

Enabling Wireless Roaming Between Standalone AP

Hello Steve,

So no special configuration done on any/both of the APs? I have no wireless controller installed, so I'll be managing the APs via CLI or Web ..

Best Regards,

Islam M. Nadim

Highlighted

Re: Enabling Wireless Roaming Between Standalone AP

Correct. There is no special config needed

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Highlighted
Enthusiast

Re: Enabling Wireless Roaming Between Standalone AP

No extra special config needed.

Sent from Cisco Technical Support iPhone App

Content for Community-Ad