cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
164
Views
0
Helpful
2
Replies
Beginner

Flexconnect 2802i AP's

Hi All

 

I have just started a role where I am working with WLC 5520 in a main coperate location.

 

Cisco 2802i AP's have already been purchased, installed and have been converted to capwap at a different location.

 

My question is, can we use one the Cisco 2802i AP's to run Flexconnect in the event of a outage if we have converted the Cisco 2802i from ME to capwap. 

 

Thank you

2 REPLIES 2
Highlighted

Re: Flexconnect 2802i AP's

Hi @JAYESH RAMAIYA 

 

Yes, you can.

 

https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112042-technote-wlc-00.html

 

FlexConnect section mentions that 2800 models work just fine.

Espero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"

**Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *

 

VIP Mentor

Re: Flexconnect 2802i AP's

if you have 5520 WLC & AP operate in FlexConnect mode, then you do not require APs to convert to ME (Mobility Express mode). Leave AP in FlexConnect mode & even if you loose WLC connectivity AP able to serve in standalone mode.

 

HTH

Rasika

*** Pls rate all useful responses ***

 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards