I have configured my switches, firewall and WLC for a new public access VLAN and WLAN. I've configured the interface and VLAN and I have everything working pretty much like I want it to.
The client is now asking if there is a way we can force a redirect to a specific URL on the launch of the browser when connected to the new public access network? They do not want guests to have to log in or be directed to a log in page but rather a forced home page, possibly something on their current website that would list terms and conditions of use? I know I can setup guest authentication but I'm not sure how I would set this up.
QuestionI have the following Air AP:Air-AP1562I-B-K9, 802.11ac outdoor access point There are three antenna cables that go from the inside cover to some soldered connections on a PCB. When removing the cover, two of the soldered antenna connections c...
QuestionHiWe have a guest access set up and was wondering what exactly are the sequence of events from connecting to SSID to being granted internet access, see below steps I'm unsure of are left blank1. connect o SSID through AP2. traffic hits Foreign WLC...
Model:C9120AXI-Q Install EWC on C9120 running with CAPWAP as shown in the attached log, but the installation fails.It looks like you're getting an error like out of storage space.Is there any good way?