cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
667
Views
0
Helpful
2
Replies

Guest WLAN client not able to get IP from DHCP

Sharath Karpur
Level 1
Level 1

Dear All, 

I have a strange situation, WLAN clients not able to get IP address from DHCP pool and not getting authenticated

- WLC Interface which are used by other WLAN works well, clients gets IP address and works well. 

- Same WLAN configuration works well across the globe. only on this controller clients fail to get ip address.

- Model : 5508 ( HA )

- Version: 8.5.140

- I did the Client debug and attaching logs. - please help guys.

-client mac address : 34:02:86:b9:76:bb

 

Regards

Sharath

 

 

2 Replies 2

patoberli
VIP Alumni
VIP Alumni
Do you have the VLAN 608 on that WLC configured and also reachable?
Or is anything else specially configured for 'SAS-Default'?

*apfMsConnTask_3: Oct 12 01:28:35.182: [PA] 34:02:86:b9:76:bb Applying Local Bridging Interface Policy for station 34:02:86:b9:76:bb - vlan 608, interface id 12, interface 'guest', nasId:'CHIA09'
*apfMsConnTask_3: Oct 12 01:28:35.182: [PA] 34:02:86:b9:76:bb override from ap group, removing intf group from mscb
*apfMsConnTask_3: Oct 12 01:28:35.182: [PA] 34:02:86:b9:76:bb Applying site-specific override for station 34:02:86:b9:76:bb - vapId 15, site 'SAS-Default', interface 'guest'

HI,

Vlan 608 is reachable and SAS-default is the AP group and required SSID is
added.

Actually I solved the issue as there was mac filtering enabled in WLAN and
in security tab > mac filtering > Free Radius was enabled ! as results WLC
and radius key was exchanging for mac authentication, I felt that was bad
and changed it to Cisco ACS and it was through.

Regards
Sharath
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card